How long does it take to fry a 15 pound turkey?
Once the temperature of the oil has reached 350°F (180°C), slowly and gently lower the turkey into the oil. SLOWLY AND GENTLY. Fry the turkey for 3 minutes per pound (455 grams). For a 15 lb (6.8 kg) turkey, this will take 45 minutes.
How long does it take to fry a turkey?
Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 45 minutes. Carefully remove basket from oil, and drain turkey. Insert a meat thermometer into the thickest part of the thigh; the internal temperature must be 180 degrees F (80 degrees C).
How do you know when fried turkey is done?
As the end of the cooking time draws near, pull the turkey out just enough so you can stick a meat thermometer into the thickest part of the thigh. If the meat thermometer reads 165 degrees, you’re done! If not, put the turkey back in and cook for a few more minutes until that temperature has been achieved.
How long do you deep fry a 20lb turkey?
A 20-pound turkey will require about 1 hour, 10 minutes. Cook until the internal temperature reaches between 180 and 190 degrees Fahrenheit.
Does Turkey have to be fully submerged in oil?
When working with large amounts of hot oil, select a cooking vessel large enough to completely submerge the turkey without it spilling over. The oil should cover the turkey by 1 to 2 inches. Select a safe location outdoors for deep fat frying a turkey. Heat the cooking oil to 350°F.
Should I cook my turkey at 325 or 350?
Roast the turkey uncovered at a temperature ranging from 325°F to 350°F. Higher temperatures may cause the meat to dry out, but this is preferable to temperatures that are too low which may not allow the interior of the turkey to cook to a safe temperature.
Is it dangerous to fry a turkey?
Deep-fat turkey fryers are extremely dangerous because they run a high risk of spilling hot oil, tipping over, and overheating; all of which can lead to burns, fires, and other injuries.
Is frying a turkey healthy?
Unless you eat the skin, there is little difference in calories and fat between the roasted and fried turkey, as long as the fried turkey is cooked in a healthy fat like peanut or canola oil. … Research has also indicated that frying properly also results in moister breast meat, compared to roasting.
Can you reuse the oil after frying a turkey?
When cared for and stored properly, you can reuse peanut oil three to five times. Keep in mind that you’ll probably need to add fresh oil each time you deep fry a turkey to bring the oil level up to the amount needed for frying.
Is Turkey done at 165 or 180?
Cook your turkey until your thermometer reads 155 -160 degrees. (Yes, we know that new safe cooking guidelines say to cook your bird to 165 degrees (they used to say 180!), but remember that your turkey will continue to cook after removed from the oven and it’s temperature will increase by 10 degrees while resting.
Do you fry a turkey with the lid on or off?
You do this by turning the hose regulator valve (the red one) to the left. Then put the lid on the pot and let the oil heat to 350°F. Lots of fryer pot lids have a hole that you can stick the thermometer right into. Your oil WILL heat without a lid if you don’t have one, it’ll just take longer.
What temperature do you take the turkey out of the fryer?
Once it has reached 350, lower the heat in order to maintain 350 degrees F. After 35 minutes, check the temperature of the turkey using a probe thermometer. Once the breast reaches 151 degrees F, gently remove from the oil and allow to rest for a minimum of 30 minutes prior to carving.
Can you overcook a deep fried turkey?
Do not overcook the turkey. If the oil maintains the proper temperature, 3 minutes per pound plus 5 minutes should be sufficient. If the turkey is cooked too long, the meat will be quite dry. Preheat the oil 10° to 15°F higher than the desired cooking temperature.
Why do turkey fryers explode?
So, when the ice from a frozen turkey meets a vat of hot oil, it instantly changes to steam and expands to 1,700 times its original volume. This can cause the oil to bubble over and if an oil particle makes contact with a flame — boom — you’re in trouble.